Hyundai Ioniq (AE): Dual Clutch Transmission Control System / Inhibitor Switch
- Components and components location
- Description and operation
- Specifications
- Schematic diagrams
- Troubleshooting
- Repair procedures
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Components1. Inhibitor switch2. Manual control lever
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Hybrid Control System
- Engine Control/Fuel System
- Hybrid Vehicle Engine Compartment
- New on site
- Most important about car
