Hyundai Ioniq (AE): Dual Clutch Transmission Control System / Clutch Actuator Assembly
- Components and components location
- Specifications
- Description and operation
- Schematic diagrams
- Repair procedures
Inspection Transmission Control Module (TCM) Inspection Procedure 1.Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground.
Components1. Clutch Actuator Assembly2. Fork Cover3. Clutch Actuator Motor (Odd)4. Clutch Actuator MOtor (Even)
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Checking the Coolant Level
- Repair procedures
- Hybrid Control System
- New on site
- Most important about car
