Hyundai Ioniq (AE): Clutch Actuator Assembly / Description and operation
| Description |
| • |
Components location : DCT (Dual Clutch Transmission)
|
| • |
Function
The clutch actuator receives signals from the Transmission Control Module (TCM) and controls the clutch. |
Specification Item Condition Specifications Resistance (line to line)Motor 157 mΩ ±10 %Motor 257 mΩ ± 10 %Rated voltage12 VMax.
Circuit Diagram
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Theft-alarm System
- Body (Interior and Exterior)
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
