Hyundai Ioniq (AE): Dual Clutch Transmission Control System / Input shaft speed sensor 2
- Components and components location
- Specifications
- Description and operation
- Schematic diagrams
- Repair procedures
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Components1. Input shaft speed sensor (Odd)2. Input shaft speed sensor (Even)
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Components and components location
- Transmission Gear Oil. Repair procedures
- Hybrid Control System
- New on site
- Most important about car
