| Components |

| 1. Timing chain 2. Timing chain guide | 3. Timing chain tensioner arm 4. Timing chain tensioner |
RemovalEngine removal is not required for this procedure. • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.