Hyundai Ioniq: Smart Cruise Control System / To Convert to Cruise Control Mode

Hyundai Ioniq (AE) 2017-2023 Owner's Manual / Driving your vehicle / Smart Cruise Control System / To Convert to Cruise Control Mode

The driver may choose to switch to use the conventional Cruise Control mode (speed only control function) by following these steps:

1. Push the CRUISE button on the steering wheel to turn the system on. The cruise () indicator will illuminate.

2. Push and hold the Vehicle-to- Vehicle Distance button for more than 2 seconds.

3. Choose between "SCC Mode (Smart Cruise Control)" and "CC Mode (Cruise Control)".

When the system is canceled using the CRUISE button or the CRUISE button is used after the vehicle is in the ready ( Hyundai Ioniq. To Convert to Cruise Control Mode ) mode, the Smart Cruise Control mode will turn on.

WARNING

When using the conventional Cruise Control mode, you must manually adjust the distance to other vehicles by depressing the accelerator or brake pedal. The system does not automatically adjust the distance to vehicles in front of you.

To Adjust the Sensitivity of Smart Cruise Control

The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted on the LCD display. Cluster type A 'User Settings → Driver Assistance → Smart Cruise Control → Response → Fast/Normal/Slow' Cluster type B 'User Settings → Driver Assistance → SCC reaction → Fast/Normal/ Slow' You may select one of the three stages you prefer...

Limitations of the System

The Smart Cruise Control System may have limits to its ability to detect distance to the vehicle ahead due to road and traffic conditions. On curves The Smart Cruise Control System may not detect a moving vehicle in your lane, and then your vehicle could accelerate to the set speed...

Other information:

Hyundai Ioniq (AE) 2017-2023 Owner's Manual: Jump Starting

In the event vehicle still does not have a functional 12V battery (check if interior lights will not turn on) then you can try a jump start to the engine compartment jumper terminals using a 12V booster pack or jumper cables from another vehicle's 12V battery according to the following instructions...

Hyundai Ioniq (AE) 2017-2023 Service Manual: Power Relay Assembly (PRA). Description and operation

DescriptionThe Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power circuit between the high voltage battery and inverter by the control signal of BMS ECU...