Hyundai Ioniq: Charging the Plug-in Hybrid Vehicle / Trickle Charge

■ Portable Charger
(1) Code and Plug (Code set)
(2) Control Box
(3) Charging Cable and Charging Connector
Trickle Charge can be used when Normal Charge is not available by using household
electricity.
If the charging connector does not disconnect due to battery discharge and failure
of the electric wires, open the hood and slightly pull the emergency cable...
1. Check the rated current of the electric outlet prior to connecting the plug
to the outlet.
2. Connect the plug to a household electric outlet.
3. Check the display window on the control box...
Other information:
1. Position the vehicles close enough that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as radios, lights, air conditioning,
etc...
Lift and Support Points1.Place the lift blocks under the support points as shown in the illustration.2.Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported.3.Raise the hoist to full height to inspect the lift points for secure support...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment

read more