Hyundai Ioniq: RCCW (Rear Cross-Traffic Collision Warning) / Warning type
If the vehicle detected by the sensors approaches your vehicle, the warning chime
will sound, the warning light on the outer side view mirror will blink and a message
will appear on the LCD display.
Information
- The warning chime will turn off when:
- The detected vehicle moves out of the sensing area or
- when the vehicle is right behind your vehicle or
- when the vehicle is not approaching your vehicle or
- when the other vehicle slows down.
- The system may not operate properly due to other factors or circumstances.
Always pay attention to your surroundings.
- If the sensing area near the rear bumper is blocked by either a wall or
barrier or by a parked vehicle, the system sensing area may be reduced.
WARNING
- With the system activated, the warning light on the outer side view mirror
will illuminate whenever a vehicle is detected at the rear side by the system.
To avoid accidents, do not focus only on the warning light and neglect to see
the surrounding of the vehicle.
- Drive safely even though the vehicle is equipped with a Blind-spot Collision
Warning (BCW) system and Rear Cross-Traffic Collision Warning (RCCW). Do not
solely rely on the system but check your surrounding before changing lanes or
backing the vehicle up. The system may not alert the driver in some conditions
so always check your surroundings while driving.
- The Blind-spot Collision Warning (BCW) system and Rear Cross-Traffic
Collision Warning (RCCW) are not a substitute for proper and safe driving practices.
Always drive safely and use caution when changing lanes or backing up your vehicle.The
Blindspot Collision Warning (BCW) system may not detect every object alongside
the vehicle.
NOTICE
- The system may not work properly when the bumper has been damaged, or
if the rear bumper has been replaced or repaired.
- The sensing range differs somewhat according to the width of the road.
When the road is narrow, the system may detect other vehicles in the next lane
Or when the road is wide, the system may not detect other vehicles in the next
lane.
- The system may turn off due to strong electromagnetic waves.
The Rear Cross-Traffic Collision Warning function monitors approaching cross
traffic from the left and right side of the vehicle when your vehicle is in reverse...
The sensors are located inside the rear bumper.
Always keep the rear bumper clean for the proper operation of the system.
Warning message
Blind-Spot Collision Warning (BCW) system disabled...
Other information:
1. Select the desired fan speed.
2. Select the desired temperature.
3. Press the defroster button ().
4. The outside (fresh) air position will be selected automatically.
If the outside (fresh) air position is not selected automatically, adjust the
corresponding button manually...
C..
Categories
Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more