Hyundai Ioniq (AE): Electric EGR Control Valve / Specifications

Specification
[Motor]
Item
Specification
Coil Resistance (Ω)
2.37 - 2.7

[Position Sensor]
Item
Specification
Opened Voltage (V)
0.7 - 1.3
Closed Voltage (V)
3.9 - 4.5

    DescriptionThe Electric EGR Control Valve is installed in between the EGR cooler and the exhaust line and is a solenoid valve. This valve controls EGR (Exhaust Gas Recirculation) amount by the ECM's duty control signal depending on engine load and the need of intake air.

    Signal WaveformFig.1) Duty control [EEGR Motor (-)] at deceleration or idleFig.2) Duty control [EEGR Motor (+)] at acceleration

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: A/C Pressure Transducer. Description and operation

    DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts.    â€¢ Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0216