Hyundai Ioniq: Body (Interior and Exterior) / Floor Console
Replacement1.Remove the plug hole.2.Loosen the mounting nuts and remove the wiper arm (A). Tightening torque : 22.6 - 26.5 N.m (2.3 - 2...
Components1. Console complete assembly2. Console tray mat3. Console upper complete assembly 4. Floor console tray assembly 5. Front console side cover [LH]6...
Other information:
To signal a turn, push down on the lever for a left turn or up for a right turn
in position (A).
If an indicator stays on and does not flash or if it flashes abnormally, one
of the turn signal bulbs may be burned out and will require replacement.
One-touch turn signal function
To activate the One Touch Turn Signal function, push the turn signal lever up
or down to position (B) and then release it...
Inspection1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose.3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt...
Categories

Air bag warning labels, required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to alert the driver and passengers of potential
risks of the air bag system. Be sure to read all of the information about the air
bags that are installed on your vehicle in this Owners Manual.
read more