Hyundai Ioniq (AE): Steering wheel / Heated Steering wheel
- Components and components location
- Description and operation
- Specifications
- Schematic diagrams
- Repair procedures
Removal1.Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.2.Turn the steering wheel so that the front wheels are placed in the straight ahead position.
Components locationHeated steering wheel control module (Body control moduel (BCM))1. Body contorl module Heated steering wheel switch1. Heated steering switch
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).4.Disconnect the lock pin to remove the heater hose pump connector (A).
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Engine Control/Fuel System
- Theft-alarm System
- Jump starting procedure
- New on site
- Most important about car
