| Component Location |

| 1. Sunvisor | 2. Retainer |
Components (1)[General Type]1. Sunvisor [LH] 2. Sunvisor [RH] 3. Assist handle4. Roof trimComponents (2)[Sunroof Type]1. Sunvisor [LH] 2. Sunvisor [RH] 3.
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Inspection1.Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature.1. Ambient Sensor (+)2. Sensor groundSpecification Ambient temperature [°C (°F)] Resistance between terminal 1 and 2 (
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.