Hyundai Ioniq: Inhibitor Switch / Troubleshooting
| Fault Diagnosis |
| Fault Diagnosis for Symptom |
|
Major Symptom
|
Expected Cause
|
Items to Check and Measures
|
| Shift lever not operating Gear not marked on cluster Shock occurs while shifting lever Warning lamp ON Engine OFF while vehicle is parked | Inhibitor switch circuit abnormal Inhibitor switch function abnormal | Check the inspection FLOW and replace the inhibitor switch |
| Inhibitor switch "N" setting faulty | Adjust "N" setting using "N" setting jig (Refer to Dual Clutch Transmission Control System - "Inhibitor Switch") | |
| Shift cable separation faulty | Adjust shift cable separation (Refer to Dual Clutch Transmission Control System - "Inhibitor Switch") | |
| Poor ground condition on reversing light circuit | Check the ground condition on reversing light and retighten it | |
| Inhibitor switch vehicle side circuit abnormal | Check the connection of junction box power terminal, fuse (TCU) terminal and replace the junction box or adjust the gap | |
| Check inside the inhibitor switch connector for foreign substance and whether terminal is bent | ||
| Poor ground condition on inhibitor switch wire | Check the ground condition of wire and retighten it | |
| Poor inhibitor unit (disconnection/short-circuit) | Replace inhibitor switch (refer to inhibitor switch inspection) |
Repair procedures
Inspection
•
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage...
Other information:
Hyundai Ioniq (AE) 2017-2024 Owner's Manual: Resetting the System, System Standby
Resetting the System The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system. The Driver Attention Warning (DAW) system resets in the following situations...
Hyundai Ioniq (AE) 2017-2024 Service Manual: Troubleshooting
Troubleshooting Error Item Failure symptom Inspection items Detailed inspections Relevant Parts/ Components Screen displayTFT-LCD screen does not turn on1)Connector attachments2)Components1)Check the connector attachments2)Check B+, IGN and GND wiring3)Check the components Connectors, wiring, fuses, dashboardWarning lightAirbag warning lamp malfunction1)Connector attachments2)C-CAN3)Components1)Check airbag + signal (connectors)2)Check C-CAN (ACU4) signal3)Check the FPC attachment inside the dashboardACU Connectors, wiring, fuses, dashboardMode conversionIntegrated driving mode malfunction1)Connector attachments2)Switch3)Components1)Check the switch input (connector)2)Check the switch signal input(disconnection or shorting)3)Check conversion with dashboard componentSwitch connector, wiring dashboardIlluminationInterior light brightness cannot be controlled...
Categories
- Manuals Home
- 1st Generation Ioniq Owners Manual
- 1st Generation Ioniq Service Manual
- Washer Fluid
- Temperature control
- How to Disconnect Normal Charger
- New on site
- Most important about car
Air Bag Warning Labels
Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. Be sure to read all of the information about the air bags that are installed on your vehicle in this Owners Manual.
Copyright © 2024 www.hioniqae.com