Hyundai Ioniq (AE): Hybrid System Overview / Safety Precautions for Hybrid System
- High Voltage Battery System
- Safety Plug
- High Voltage Battery Cooling Duct
- If an Accident Occurs
- When the Hybrid Vehicle Shuts Off
The hybrid system informs the drivers its energy flow in various operating modes. While driving, the current energy flow is specified in 11 modes. Vehicle Stop The vehicle is stopped.
â– HPCU (Hybrid Power Control Unit) â– High Voltage Battery System WARNING Never touch orange colored or high voltage labeled components, including wires, cables, and connections.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- Suspension System
- How to Connect Portable Charger (ICCB: In-Cable Control Box)
- New on site
- Most important about car
