Hyundai Ioniq (AE): Brake System / AHB(Active Hydraulic Boost) System
- Description and operation
- Components and components location
- Schematic diagrams
- Repair procedures
- Brake Actuation Unit. Components and components location
- Brake Actuation Unit. Repair procedures
- Hydraulic Power Unit. Components and components location
- Hydraulic Power Unit. Repair procedures
Removal1.Turn ignition switch off and disconnect the battery (-) cable from the battery.2.Disconnect the EPB control module connector.3.Loosen the mounting nuts and then remove the EPB control module.
DescriptionRegeneration Brake SystemDuring deceleration or braking of an electric vehicle or HEV, the drive motor acts as an alternator and charges the battery by converting the vehicle’s kinetic energy generated during braking into electrical energy.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- General Information
- Maintenance
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- New on site
- Most important about car
