Inspection1.Disconnect the negative (-) battery terminal.2.Remove the front door quadrant inner cover (A).3.Disconnect the power door mirror connector from the harness.
Component Location1. Driver power window switch2. Assist power window switch3. Rear power window switch4. Front window motor5. Rear window motor
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Trouble Symptom ChartsTrouble Symptom 1Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward"Surging" (repeated alternating acceleration and deceleration) occurs after settingMalfunction of the vehicle speed se