Removal1. Remove the front bumper cover.(Refer to Body - "Front Bumper Cover")2.Remove the horn after loosening the mounting the bolt.[Low Pitch Horn][High Pitch Horn]Installation1.
SpecificationsAudio Items AUDIO ModelRADIO/CD/MP3Power supplyDC 14.4VParasitic currentMax.
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.