Inspection1.Disconnect the negative (-) battery terminal.2.Remove the front door quadrant inner cover (A).3.Disconnect the power door mirror connector from the harness.
Component Location1. Driver power window switch2. Assist power window switch3. Rear power window switch4. Front window motor5. Rear window motor
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper