Hyundai Ioniq (AE): Brake System / Brake System
- Repair procedures
- Brake Line. Components and components location
- Brake Line. Repair procedures
- Brake Pedal. Components and components location
- Brake Pedal. Repair procedures
- Front Disc Brake. Components and components location
- Front Disc Brake. Repair procedures
- Rear Disc Brake. Components and components location
- Rear Disc Brake. Repair procedures
- Stop Lamp Switch. Components and components location
- Stop Lamp Switch. Schematic diagrams
- Stop Lamp Switch. Repair procedures
- Stop Lamp Switch. Troubleshooting
Integrated Electronic Brake (IEB) System Air Bleeding Procedures • Do not reuse the drained fluid.• Always use genuine DOT3 or DOT4 brake Fluid.
Operation and Leakage CheckCheck all of the following items : Component Procedure Integrated Brake Actuation Unit (IBAU) (A) and Pressure Source Unit (PSU) (B)Check brake operation by applying the brakes during a test drive.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Photo Sensor. Repair procedures
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Suspension System
- Brake Fluid
- Engine Control/Fuel System
- New on site
- Most important about car
