Hyundai Ioniq (AE): Restraint / SRSCM
- Components and components location
- Schematic diagrams
- SRS Control Module (SRSCM). Description and operation
- SRS Control Module (SRSCM). Components and components location
- SRS Control Module (SRSCM). Repair procedures
- Front Impact Sensor (FIS). Description and operation
- Front Impact Sensor (FIS). Components and components location
- Front Impact Sensor (FIS). Repair procedures
- Side Impact Sensor (SIS). Description and operation
- Side Impact Sensor (SIS). Components and components location
- Side Impact Sensor (SIS). Repair procedures
Component Replacement After Deployment • Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.
Components1. Supplemental Restraint System Control Module (SRSCM)2. Pressure Side Impact Sensor (P-SIS)3. Front right Pressure Impact Sensor (FIS)4. Front left Pressure Impact Sensor (FIS)5.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Description and operation
DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower moto
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Safety ON/OFF Switch. Repair procedures
Inspection1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad Lower Panel")3.Remove the lower crash pad switch assembly (A) after disengaging the mounting clip.4.Remove the rheostat switch connector (A).
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Suspension System
- Checking the Coolant Level
- Body (Interior and Exterior)
- New on site
- Most important about car
