Hyundai Ioniq (AE): Engine Electrical System
- General safety information and caution
- High voltage shut-off procedures
- Specifications
- Troubleshooting
- Ignition System
- Crankcase Emission Control System
- Schematic diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve. Description and operation
- Positive Crankcase Ventilation (PCV) Valve. Repair procedures
- Evaporative Emission Control System
- Schematic diagrams
- Canister. Repair procedures
- Fuel Tank Air Filter. Repair procedures
- Fuel Filler Cap. Description and operation
- Exhaust Emission Control System
- Description and operation
- Catalytic Converter. Description and operation
- CVVT (Continuously Variable Valve Timing) System. Description and operation
- GPF (Gasoline Particulate Filter). Description and operation
- GPF (Gasoline Particulate Filter). Schematic diagrams
- GPF (Gasoline Particulate Filter). Repair procedures
Removal and InstallationFront Muffler1.Disconnect the battery negative terminal.2.Disconnect the oxygen sensor connector (A).3.Remove the heat protector (A).
Safety PrecautionPrecautions To Take Before Servicing High Voltage System • Since hybrid vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric shock and electric leakage.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: In-car Sensor. Description and operation
DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the contr
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Brake System
- Theft-alarm System
- Jump starting procedure
- New on site
- Most important about car
